Absorbing Material EMI Absorber Sheet With Tape

Among those famous absorbing material emi absorber sheet with tape manufacturers, it is a professional supplier in China, welcome to wholesale absorbing material emi absorber sheet with tape from our factory.Unlike shielding material, EMI Absorber tape are electrically non-conductive and safe to be applied on a PCB without short-circuiting. It can blanket the noise source to attenuate the EMI RF emission or to protect the sensitive IC's from other noise source to ensure their proper performance. While shielding material tries to confine the EMI noise from leaving the enclosure to satisfy FCC regulations, the EMI RF, confined within the enclosure (standing wave), will sometimes affect the performance of other critical IC circuitry. EMI absorbers attenuate the RF by changing it into heat energy which dissipates in an instant.  With EMI absorbers, magnetic metal particles are suspended in an elastomeric, such as epoxy or silicone, sometimes in a strategic array.  Some are designed to be wide-range frequency absorbers, high frequency absorbers, or low frequency absorbers to suit the need.  Combination of type of magnetic metal particles, their size, density, and thickness of the absorber can determine the effectiveness and frequency range.  Some are designed to be most effective at a specific frequency.    NS SERIES EMI Absorber Tape Ns series EMI absorber tape consists of a flexible rubber filled with soft magnetic metal powders. It can suppress noise radiated from electronic devices across a wide frequency range. An acrylic pressure-sensitive adhesive allows for easy application. The flexible sheet can be easily cut into complex shapes.Product typeNS30NS45MaterialsAlloy powders PolymerApplication   frequency range (GHz) 0.1~6.0Thickness(mm) 0.1~1.0Standard   packaging (mm)                     200×300 per Roll or Sheet   Density (g/cm^3）3.13.2Initial   Permeability (@1MHz) 3045Attenuation (dB)Reflection Loss   and Transmission loss, Refer to the GraphTemperature   range （℃〉-40 to 100Surface resistivity   <Ω>1000000EnvironmentRoHS ComplianceHalogen   Free
Absorbing Material EMI Absorber Sheet With Tape